Articles:

The three methods above can help you to remove all but the most stubborn stains, leaving your carpet looking almost as good as new.. We’ve also written a number of other cleaning guides for carpets that you might want to read.

To fix this issue,.remove the brush and carefully cut away hair.

Gtech has made it easy to clean the Multi Mk2’s filter.Here’s a quick recap of the process:.Remove the bin and pull out the filter..

Tap off excess dirt into a bin (you may also want to tip loose dirt inside the filter housing into a bin).Rinse the filter in cold water from a tap without a detergent.

If possible, rinse until the water runs clear.. Gently squeeze off excess water, then allow the filter enough time to dry fully.. Reinsert the filter into the bin and reattach the bin to the vacuum.. Do you have any questions about the Gtech Multi Mk2?

Please let us know in the comments section.Has your Dyson V6 battery started to underperform?Check for a Broken Brush.

It’s possible that the brush roll itself is damaged, which can stop it from turning correctly.This is much less common than a broken belt, but is something to check for if you’re sure that the belt is working correctly.. Again, switch off and unplug the vacuum, before turning it over so you can see the brush.

Take a look for any signs of cracks or other damage to the brush.You can also spin it manually to inspect the brush from different angles..